We use a high quality fabric label that is very durable. Labels must be applied according to our instructions.

Indelible ink is used to permanently print onto the label using Thermal Technology. Printed Labels are simply peeled off the backing paper (they feel dry on the back). The labels are ironed on to the garment, using a medium heat domestic iron set to 'dry'. Ensure that the iron is empty of all water/steam. The heat activates the adhesive and provides a permanent bond that is resistant to regular wash/dry cycles.

Our Labels have been tested to (UK) BS5742 wash care tests. Full ironing instructions are printed on the underside of the backing paper.

Please Note:

• Iron-on Labels are not suitable for garments which need to be dry cleaned
• Labels will not adhere well to garments manufactured from a ‘fluffy’ or coarse material. (For garments such as ‘Fleeces’ or woollen products, it is sometimes possible to get a good bond by applying the iron-on label to the manufacturers label.)
• It is important that iron-on labels are applied to a clean, dry, ‘smooth’ surface (eg not on a stretchy waistband) and left to bond overnight before washing.

• Iron-on Labels accept up to two lines of text. We recommend a maximum of 20 letters per row. For long names with over 20 letters use 2 rows with row 1 for the first name and row 2 for the second name. An Icon may be added at no extra cost - the recommended letters per row is reduced to 14.

1. Ensure that the item of clothing is completely dry.
2. Ensure that the iron is EMPTY OF WATER
   (No steam or water should be present as this effects the label adhesive).
3. Set the iron to the “Dry” mode, temperature 140-170 Degrees C (middle/medium setting).
   It is important that the iron is sufficiently hot to "activate" the adhesive, but not so hot it damages the label. Test Labels are included to test the heat of the iron.
4. Position the label on the inside of the garment. Holding the iron flat, press the name label (text up) gently into position
5. Turn the garment over.
6. Holding the iron flat, press on the 'right-side' of the garment and hold for 10-15 seconds. This draws the adhesive into the garment.
   • DO NOT move the iron around!
   • Remember to use a thin pressing cloth when applying labels to delicate fabrics.
7. Allow the garment to cool down.
8. Turn the garment over. Repeat pressings (text up) for three pressings and coolings, hold the iron flat and still for 10-15 seconds each press.
9. Leave to bond for a minimum of 12 hours before washing.